Fairino FR10
- Payload10 kg
- Reach1400 mm
- Repeatability±0.05 mm
The model we see most at CNC machines. 10 kg payload and 1400 mm reach give room to reach into the machine and to a tray next to it.
Price on request
View the Fairino FR10Cobot applications
A machine tending cobot loads raw parts into your CNC machine or press and takes the finished parts out. Your operator no longer has to stand at the machine door, and the machine keeps running during breaks, after the shift and often through the night.

In machine tending, the cobot takes a blank from a tray, drawer or table, waits for the machine to open, places the part in the chuck, vice or die and starts the cycle. When the machine is done, it takes the finished part out and puts it back in the tray or on a conveyor. Many cells use a double gripper, so the cobot holds the next blank while it takes out the finished part.
This works well for small and medium series in job shops and production companies: CNC lathes, milling machines, grinding machines, presses, saws and test benches. The cobot talks to the machine through digital I/O or a fieldbus, or simply works with sensors when the machine has no robot interface.
Look at the weight of the part plus the gripper, and at the distance from the tray to the chuck or die. These models cover most machine tending jobs.
The model we see most at CNC machines. 10 kg payload and 1400 mm reach give room to reach into the machine and to a tray next to it.
Price on request
View the Fairino FR10For heavier parts and double grippers. 16 kg payload and ±0.03 mm repeatability, on a more compact 1034 mm reach.
Price on request
View the Fairino FR16For small parts on compact machines. 5 kg payload, 922 mm reach and ±0.02 mm repeatability.
From €4,900 excl. VAT
View the Fairino FR5When one cobot serves two machines or has to reach far into a large one. 20 kg payload and 1854 mm reach.
Price on request
View the Fairino FR20Prices excl. VAT, ex works Belgium.
Most machine tending cells use a pneumatic or electric parallel gripper with fingers made for your part. A double gripper, or two grippers on our dual tool adapter, saves a lot of time per cycle. We design and make custom fingers and fixtures in house.
Many CNC machines have a robot interface or free I/O to open the door, close the chuck and start the program. The controller has 16 digital inputs and 16 digital outputs, and a PLC can drive the cobot through our communication card. No interface? Sensors can do the job, as in the saw case below.
A cobot does not make the machine safe. The machine keeps its own guarding, and a press always needs its own safety measures. Whether the cobot itself can work without a fence follows from the risk assessment of the whole cell.
The machine cycle usually sets the pace, not the cobot. What matters is how many parts the cobot can take from its tray or drawer before someone has to refill it. That decides how long the machine runs without an operator.
Projects where a Fairino cobot keeps a machine running:
An FR10 loads and unloads a Doosan lathe through its robot interface, with a dual gripper and clamp cleaning before every part.
Read the caseAn FR10 takes parts from a saw and sorts them into bins. Sensors drive the process, so the saw now runs through the night.
Read the caseCobots, tooling, pneumatics and mounting for a machine tending cell.
Lathes, milling machines, grinding machines and most other machines with a door the cobot can reach through. A robot interface or free inputs and outputs on the machine help, but they are not required.
The FR10 is the most common choice, with 10 kg payload and 1400 mm reach. For heavier parts or a heavy double gripper, look at the FR16. For small parts on a compact machine, the FR5 is often enough.
Yes, for feeding blanks and removing parts. The press keeps its own safety measures, and the risk assessment of the cell decides what extra protection the cobot needs.
Not always. In the saw outfeed case at Elnor Motors, sensors drive the whole process and the cobot does not talk to the saw at all. When the machine has I/O or a robot interface, a direct connection gives more control.
That depends on how many blanks fit in the tray or drawer and on the machine cycle time. A larger part buffer means a longer run without an operator, for example through the night.
Yes. On a mobile mounting table you roll it to another machine and load another program. Each machine needs its own taught positions and a fixed reference, so the cobot finds the chuck again.
Tell us which machine you want to tend, the size and weight of your parts and your batch sizes. We tell you which cobot and gripper fit, and you can test your parts in Ieper.
Tell us what you want to automate. You get an official quotation, usually within 24 hours.
Request an official quotationCall us on +32 57 21 28 28, Monday to Friday, 08:00 to 16:30. Or have a look at our support page.
Call +32 57 21 28 28See Fairino cobots at work in Ieper, Belgium (Rozendaalstraat 14) and bring your own parts to test. Please make an appointment first.
Plan your visit